-
Fiberglass Round TubeFiberglass Round Tube for Handrails, Conduit and Mastsread more
A round section behaves the same in every direction. Rotate it and nothing changes — which is why it is the default choice for... -
Fiberglass Square TubeFiberglass Square Tube: Sizes, Load Ratings and Machining Notesread more
Most pages selling this profile list three properties — corrosion resistance, light weight, electrical insulation — and leave... -
Fiberglass Flat BarProcess: Continuous pultrusionread more
Widths held: 14 dies
Width range: 30–210 mm
Thickness range: 3–20 mm
Tensile, longitudinal: ≥ 800 MPa
Tensile modulus: ≥ 40 GPa... -
Fiberglass Angle BarProcess: Continuous pultrusionread more
Sizes held: 30 dies
Leg range: 20–200 mm
Thickness range: 3–10 mm
Tensile, longitudinal: ≥ 800 MPa
Tensile modulus: ≥ 40 GPa... -
Fiberglass I BeamProcess: Continuous pultrusionread more
Sizes held: 29 dies
Depth range: 30–190 mm
Flange range: 10–131 mm
Tensile, longitudinal: ≥ 800 MPa
Tensile modulus: ≥ 40 GPa... -
Fiberglass H BeamProcess: Continuous pultrusionread more
Sizes held: 3 dies
Depth range: 110–130 mm
Flange range: 56–100 mm
Tensile, longitudinal: ≥ 800 MPa
Tensile modulus: ≥ 40 GPa... -
Fiberglass Round RodProcess: Continuous pultrusionread more
Type: Solid section
Diameter range: 6–30 mm
Tensile, longitudinal: ≥ 800 MPa
Tensile modulus: ≥ 40 GPa
Volume resistivity: ≥ 1013... -
Fiberglass Square BarProcess: Continuous pultrusionread more
Type: Solid section
Sizes held: 2 dies, 8 × 8 mm
Tensile, longitudinal: ≥ 800 MPa
Tensile modulus: ≥ 40 GPa
Volume resistivity: ≥... -
Fiberglass Rectangular TubeProcess: Continuous pultrusionread more
Sizes held: 50 dies
Range: 25–120 mm
Aspect: Non-symmetric section
Tensile, longitudinal: ≥ 800 MPa
Tensile modulus: ≥ 40 GPa...
Kevlar-Filled Wear-Resistant Nylon Rods. Designed for extreme wear resistance, this Kevlar-filled nylon 6/6 material lasts up to 20 times longer than unfilled nylon. Also known as Hydlar Z, it is...
Tubing comes in round and square shapes in varying lengths. Carbon fiber tube is lightweight tubing constructed out of both carbon fiber and reinforced plastic, making it a good choice...
Less flexible than solid fiberglass, Filament Wound Epoxy Tubes (FWET) are lightweight and strong. You might recognize these fiberglass tubes as tent poles, but they have many other uses as well,...
Fiberglass (random directional) mat, pulled via hydraulics through a bath of resin and pigment. Heated and cured. Our stock lengths are the perfect sizes to ship via standard parcel carriers like...
MGS Fiberglass Sizes that sleeve 1/4″ OD, 9/64″ ID, Round Hollow Tube: 1/8 inch OD (.125″) Round Solid Rod fits inside our 1/4 inch OD Round Hollow Tube (full length sleevable) 1/2 inch OD Round...
Fiberglass Pole from Tstar is with high-quality reinforced materials and epoxy resin. Compared to the traditional bamboo pole, fiberglass pole for Tstar have the advantages of corrosion resistance,...
