Enbuess Polyurethane Window Profiles Receive Good Materials Designation in China

Nov 16, 2026

Leave a message

Enbuess polyurethane window profiles receive "Good Materials" designation in China

 

By Enbuess Composites | 16 November 2026, 10:00 (UTC+8)

Enbuess Composites  has received the "Good Materials"  designation for its polyurethane window and curtain-wall profiles. The designation was announced at a working meeting of the hardware and door-and-window branch of the China Building Materials Enterprise Management Association (中国建筑材料企业管理协会), held in Langfang, Hebei province, on 14 August 2026.

The company attended the meeting at the branch's invitation. Qi Bei , director of Enbuess's door-and-window division, was appointed a senior expert in doors and windows by the association at the same event.

Neither the meeting agenda nor the selection process behind the designation has been published. This article reports what the company disclosed and does not infer the criteria applied to any individual product.

 

What the designation covers

According to the programme description cited in the company's announcement, the "Good Materials" designation is intended to identify building products that meet criteria for health, safety, green performance and product quality.

That framing makes the designation a multi-attribute assessment rather than a ranking on a single performance figure. For buyers it works as an external reference at the shortlisting stage. It is not a product certification, and it does not replace type testing: mechanical and thermal performance still have to be demonstrated by test reports issued for the specific product and batch.

 

Where polyurethane profiles sit

Polyurethane window and curtain-wall profiles belong to a different material route from the aluminium profiles that dominate China's window market, including thermally broken aluminium.

In a thermally broken aluminium system the frame is metal and the thermal bridge is cut by polyamide strips or cast-in resin. In a polyurethane profile the frame is a resin-based composite and the material itself is not a metal conductor, so thermal performance is driven by section design and wall thickness rather than by inserting a break into a conductive frame. Surface durability follows the same split: aluminium depends on a coating or an anodised layer, while a composite profile depends on its resin system and its surface layer.

None of this makes every composite profile better than every aluminium profile under every project condition. Suitability depends on the climate zone of the project, the required U-value of the complete window system, and the fit between profile, hardware, glazing and seals.

 

Division director appointed association expert

Qi Bei's appointment places a company engineer inside the sector's technical discussion rather than only on its supply side. Industry associations typically involve appointed experts in standards work, evaluation methodology and technical review. The association has not published the scope of the appointment.

 

What it means for specifiers

For developers, window fabricators and façade contractors screening profile suppliers, the designation is worth separating into two parts.

What it supports: the product passed an evaluation run by an industry association whose stated dimensions are health, safety, green performance and quality. That is a usable external reference when narrowing a supplier list.

What it does not settle: whether the profile suits a given project. That still depends on the project's climate zone, the required U-value of the whole system, and compatibility between profile, hardware, glazing and seals. A designation reduces the chance of choosing the wrong supplier. It does not reduce the chance of choosing the wrong system.

 

About Enbuess Composites

Enbuess Composites is a Chinese composites manufacturer whose product line includes polyurethane profiles for windows and curtain walls. The company operates a dedicated door-and-window division.

 

Sources and corrections

Facts in this article are drawn from Enbuess Composites' public announcement of 14 August 2026. The description of the "Good Materials" programme is quoted from that announcement; no separate written statement from the association was obtained. No test data is cited. Where performance values matter, the third-party test report for the specific product governs.

Corrections: contact details are listed in the site footer. Verified factual errors will be corrected and the modification time shown.

news-1000-562

Send Inquiry
Contact usif have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!